C6A-P outlet plate
c6A outlet plate package

RV, Caravan Antenna Point Thru-the-Wall Outlet Plate with built in Power Injector.


Active Thru -the–wall Connection kit

Part Number:C6A-P

Share this product!
Report Abuse


RV, Caravan Antenna Point is a Thru-the-Wall outlet plate.

This RV digital connection Outlet Wall Plate is designed to suit any caravan, mobile home, etc, for a TV antenna Point.

It is designed to go straight from the inside wall to the outside wall eliminating the need and loss of extra cable and connections.

This creates a much more reliable and efficient connection.

This is an “Active” plate meaning it has a built-in power injector with noise reduction power supply filters, to handle low level signals with minimal loss.

It is designed to power your mast head (booster) amplifier to a single point.

You can split the signal after the power injector or before, if using a power passing splitter – however be aware that splitting the signal to one point only always and with any system does incur signal loss of approximately 3 dBuV. To more easily relate to this amount: a +3 dBuV of your signal would be half as much signal again. A -3 dBuV therefore is a drop of an equivalent level.

This unit suits:

  • Wall thickness between 22mm and 34mm.


  • Extensions are available to extend the length if required.



  • Wall thickness between 22mm and 34mm.
  • Stainless steel external fittings.
  • Black UV stabilised Silicon rubber cable weather protection boot.
  • Rated frequency range : 45 MHz – 1 GHz.
  • 12VDC input 500mA Built in Power Injector with Power supply noise filters built in.
  • DC socket is a 2.5 mm centre Pin and Centre Pin Positive.

Parts Included

Parts included:

  • Active (with built in power injector) through the wall connection kit.
  • Rubber washer
  • 3/8-inch ID to 3/4-inch OD Stainless steel Flat washer.
  • Stainless steel “F” nut.
  • Screw on Weather Stopper – Silicon Rubber outside and Metal threaded insert inside.
  • 2 x #6 x ¾ inch Panhead Philips Self tapping screws.
  • Full installation Instructions.

Vendor Information

  • Store Name: Wilkgard Technology Group
  • Vendor: Wilkgard Technology Group
  • Address: 13/12 Edina Rd
    Ferntree Gully
    Victoria 3156
  • No ratings found yet!

Additional information

Weight 0.2 kg
Dimensions 11 × 11 × 16 cm


C6A&PC6A and C -Instructions 

Product Enquiry