Tripod Mount with1.8 m Pole
bent stay bar 1
bent stay bar end too match
mounting and rubber feet
tripod mount
TRM118 tripod mount
rubber feet
strammit roof deck
TRM118Fd package
TRM118FD label

TV, 4G Internet, Helium Hotspot or Mining and Home Weather Station Antenna Tripod Mount with1.8 m Pole for Stramit Deck Roof


TRIPOD Mount 1.8 meter For Flat deck stramit Roof

Part Number: TRM118FD-P

Share this product!
Report Abuse


TV, 4G Internet, Helium Hotspot or Mining and Home Weather Station Antenna

Tripod Mount with 1.8 m Pole for Stramit Deck Roof.

4G Internet, Helium Hotspot or Mining  and Home Weather Station Antenna

Tripod Mount with1.8 m Pole Ideal for Weather Stations, Ham Radio or TV antennas

  • Attach to Stramit Deck Roof using the included 3 Stramit Deck mounts and simply bolt tripod legs to the deck mount.

1800 mm Mast included.

  • This is an easy mount to use.
  • It is strong, well supported and should be used for mounting large antennas or smaller antennas that require a rigid mounting to prevent movement from effecting the signal. Such as 4G or Helium Network antennas.
  • The easy to use Stramit Mount feet supplied are quick to install and secure.
  • The wind resistance of  antennas can be significant, but this mount will support the antenna without a problem.
  • Highly recommended to provide that professional quality installation.

Technical support is provided.

Warranty: Note an exception to our standard warranty terms -this product may exhibit small indents or defects in the coating of the large metal tubes and these are not covered under warranty. They will not affect the performance of the product in terms of strength or longevity but may exhibit slight spot surface rust after a while in service.



  • Mast measures 1.8 meters x 25 mm.
  • All masts and stays are galvanised.
  • Fixings are Zinc Plated.
  • Stramit Mount feet are Hot dipped Galvanised.

Parts Included

Parts Included:

  • 1800 mm x 25mm mast.
  • Telescopic stay bars 25mm wide.
  • 25mm x 8mm diameter Hex head set screws.
  • 8mm Hex Nuts ZP.
  • 15mm x 5mm TEK Hex Flange Head screws.
  • 25mm x 6mm diameter self-tapping wood screws Hex Head.
  • 25mm saddles.
  • 25mm Mast cap.
  • Rubbers for adaptors brackets.
  • Stramit Mounting Feet.
  • 6 x 6 mm ZP Nuts.
  • 6 x 6 mm x 25 mm Hex head bolts.



Vendor Information

  • Store Name: Wilkgard Technology Group
  • Vendor: Wilkgard Technology Group
  • Address: 13/12 Edina Rd
    Ferntree Gully
    Victoria 3156
  • No ratings found yet!

Additional information

Weight 6 kg
Dimensions 183 × 11 × 11 cm

Product Enquiry